In the era of constant industrial development, the air compressor has become an indispensable device in our daily life. Still, as this machine is quite complex, if you want to install it, you are going to need a thorough air compressor installation guide. Well, we understand this. And that’s why today, we have decided to bring you one.
If you are having issues with your air compressor, this is just what you need. Keep reading this article, and we will provide you with all the crucial knowledge about the air compressor. Stay tuned!
Air Compressor Installation Guide – About The Air Compressor
Before installing, let’s have a more in-depth insight into the basic components of the machine.
- The Air Tank
The receiver tank stores all compressed air for later usage. It may be vertical or horizontal, varying in size and capacity. Typically, it is sized at 6- 10 times the flow rate of the system, which allows the stored air a chance to cool.
- The Horsepower Motor
This part is often placed above the air tank, and it works just like a car engine, powering the compressor pump. Its flywheel fan helps cool the compressor pump as well.
- Regulating Parts
These components include the manifold kit and various valves. What you need to look for are two gauges of manifold kit, one of which shows the pressure inside the tank while the other indicates the air coming out.
There are also three types of valves you should pay attention to, namely valve check, safety valve, and drain valve.
Basic Installing Process
After having acquainted yourself with some parts of your new air compressor, let’s spare some time reading through these following steps and get started!
Step 1: Choose The Location For Your Machine
Make a decision about where to place your air compressor is one of the most crucial parts in the set up process, as the location will directly affect the way the machine works.
It’s highly recommended that an air compressor should be installed within a clean, dry area. Otherwise, your device can’t undertake work effectively and it may cause electrical or fire accidents. You don’t want such unwanted misfortunes, do you?
Step 2: Plug An Air Hose In The Compressor
Air hose is not included in the price of an air compressor, so you need to buy it separately. The type of air hose will depend on your air compressor, so take it into serious considerations when buying ones.
Do the fittings carefully so that there will be no air leaks, and the air hose doesn’t punch upon itself. Then, quickly plug it in on the machine’s body.
Step 3: Attach Compressor Assembly Accessories
When you purchase a new air compressor, most of its parts have already been assembled, ranging from air dryer, air filter, electric motor, and air tank, so don’t concern yourself with them too much, however, there are still some small pieces that you may have to plug in on your own. But don’t worry! It’s not a challenging task like you may imagine! Read the manual carefully, and plug each piece into where it should be.
Remember to attach them carefully, because your air compressor’s efficiency depends on them.
Step 4: Start The Machine And Have A Check
- Turn the regulator knob to the left to make sure it’s always closed, and the gauge says zero PSI.
- Turn the machine on.
- Check whether you hear any air leak
- No need to care about loud noise when the machine is running.
- When the regulator indicates that your machine reaches 150 PSI, it will automatically stop.
- Then you have succeeded! Now you’ll be able to get some air for the hose!
Why Is A Correct Setup Crucial?
It’s without a doubt that even if you purchase the most advanced machine but don’t install and use it correctly, you might be better off buying nothing.
The case is also valid when it comes to an air compressor. Without proper installation, the latest and greatest piece will do you no good. Consequently, your machine won’t give you long- term usage and the most satisfying service.
Proper installation of your machine makes all the difference in the world. You will possess the most reliable, energy-efficient, and safe compressed air system ever.
Some Installing Advice
Undeniably, a little forethought can save you from headaches when it comes to repairing and maintenance expenses for the time being. Now we will give you some useful advice so that you can have the right installing decisions:
Choose A Place Close To The Power Source When Setting Up Your System
The closer the air compressor is to the significant point of use, the better you will get out of it, as this will save you an inconsiderable amount of money on piping and energy.
Check The Electricity Source Before Installing
Check to make sure that your electrical service voltage matches that on the machine nameplate as damage or failures due to insufficient or excessive voltage source may be a culprit behind your compressor’s reduced longevity.
Take Safety Tips
Keep it in mind: safety is the priority. Don’t forget to wear personal protective items and turn off the power source to avoid unnecessary accidents.
We’ve just introduced you to some basic knowledge of the air compressor and its basic setup guide. Whether your device runs smoothly, effectively, and becomes your friend in your home or not depends on the installation process. If you fail to install it properly, your greatest air compressor will be a doorstop as well.
Therefore, try to follow our air compressor installation guide mentioned above with some necessary cautions, and you will not only receive the most satisfying service of your compressed air system ever but also have long- term usage. Good luck with your new machine!
I am a licensed architect who is passionate about all things home improvement industries, I have been doing DIY painting projects and have developed lots of experience around home improvement over the 10 years.