You often paint walls and fences around the house, suddenly one day you need to spray paint for rubber and that is where we step in and lend you our assistance. Maybe you want to paint the rubber chair legs, mats or the sealed buttons of your window, or a rubber tire for garden decoration. The list goes on but don’t worry cause we have what you need right here.
However, at this point, you have a problem that the paint does not adhere well to the rubber, so let me give you mine knowledge to solve it. That’s the time you wonder if rubber spray paint is difficult, and want to have the simple guide you need to know.
All you have to do is to read our following article immediately with the spray rubber tutorial, the best paint for this spray paint and some other useful tips for you. Are you ready to explore more? Let us show you how to do it. To better understand the spraying on rubber, we want to give you the information of the rubber composition.
10 Main Steps To Spray Paint On Rubber
Here’s the most important part for you. Please read these steps carefully and follow them.
You need to prepare some things such as rags, soap of dishwashing, suitable spray paint bottle, painter’s tape, paint brushes, acrylic paint of the same colour, polyurethane, etc.These are essential items, and you may need to use additional materials if you decorate with different paint colours. Let your creativity make great things.
You can start to clean the rubber things with wet rag and soap or dishwashing. You should wash the rubber surface thoroughly to remove dust and dirt, then rinse with clean water again and let them dry completely before paint spraying.
You need to gently sand the surface with sandpaper in a circular motion to avoid scratches and then wipe the surface. After that, you should clean the surface with alcohol to clean the oil, which prevents the paint from sticking.
Remember that a clean and smooth surface for spray paint makes the paint more adherent.
You conduct spray paint on rubber. If you use spray paint, you should work in a well-ventilated place, ideally working outdoors. You can use the painter’s tape for any area you want to avoid painting.
Most spray paints in the market are combined paint plus primer, so you don’t need to pre-primer. However, you should check the product label to make sure it suits the plastic or rubber or multi-surface. This spray paint is often designed for both indoor and outdoor use. You can apply the number of coatings depending on the rubber things to be painted to cover its original colour completely.Note: In case you use spray primer before official painting, you should make sure to completely cover the surface to be painted and take time for dry primer. Spray paint is especially useful when used on rubber, but you can use acrylic or enamel paint.
The best way to spray paint is that you need to keep the spray bottle away from the surface of the object about 30 cm to 45 cm, and you spray the paint by moving the paint bottle horizontally and gently. You need to keep the spray speed steady.
You need to wait for each layer of paint to dry before painting the next layer and change the paint direction of each layer such as for the first layer you paint the lines side by side, the second one you paint from top to bottom, etc. For most paints, you only need to wait 15 to 20 minutes to dry, and you should let the final coat dry for about 24 hours.
If you have pasted the tape on the previous stage, you should peel it off right now to be careful not to damage the paint. You can use paint brushes with acrylic paint of the same colour to handle peeling and blanks when spraying.
It is the time to correct the paint surface to make it more beautiful.
This is a step to add a pattern to the main paint and to apply a layer of polyurethane to coat the surface to be durable (or a plastic coating spray).There are many ways to help you paint patterns such as spray paint on a pattern, use a small tip to draw, add bright areas or create shadows with lighter or darker paint. You should paint some thin coatings, allow to dry about 30 minutes between each paint.
Finally, to complete the paint spraying process on the rubber, you need to wait for the final coating to completely dry. The drying time of the paint can be noted on the product packaging.Do not forget to read the instructions for more information because you can see with your eyes and touch it to feel the paint seems dry, but it is not really dry and will easily peel off if used.
See more: How to Paint a Car with Paint Sprayer.
So, What Is Rubber Made Of?
It is formed by the combination of isoprene polymers and natural substances and impurities. Natural rubber is from rubber tree sap. We can also make synthetic rubber with crude oil. Natural rubber is a very soft and low-use substance, so most of the rubber is hardened by vulcanisation, cross-linking molecules to make it harder.
Since then, it has been widely used in the manufacture of products such as tires, tubes, raincoats, etc. Because rubber has a high elasticity, the paint used on this surface only lasts for a while which is a unique property.
Is Rubber Spray Paint Difficult?
If you follow the proper ways to do it, the task will be easy as cakes. It can be said that the paint does not stick well to the rubber, so there should be some preparation techniques to encourage paint adhesion and if you want to paint on a rubber surface, you need to learn the methods and correct steps before starting properly to have the best result.
The most important thing that you should keep in mind is choosing the right type of spray paint for rubber, proper treatment of the paint surface and performing the spraying operations sequentially to get the perfect paint result.
Let’s continue reading and exploring the spraying techniques on rubber.
Firstly, We Suggest Some Paints To Use On The Rubber For You
It is possible to paint on rubber things if you do it correctly, the paint will be hard to peel off. You also need to choose the paint type that suits your paint needs and places.
Rubber Coating That You Can Remove
It is the type of paint you can remove from the rubber surface after a period of use, let’s buy a removable rubber coating. On the market, it sells in the form of a spray, works well for decorating places that you don’t want to permanently paint even though the product is still durable and will only peel off when you remove them.
Another Good Paint For Rubber Is Acrylic Paint
This paint is suitable for household items made of rubber without much wear and tear. The tip for you here is to apply two coats of acrylic paint and make sure the paint has enough time to dry between different layers completely. After the paint is completely dry, you need to seal it with a paint sealer.
For Items Used Outdoors, You Can Buy Exterior Paint
It is durable and non-toxic paint for your safe use. You need to cover the rubber surface with an external primer to help the paint stick well and allow it to dry entirely before officially painting the entire item. You can use paint brushes or spray paint tools. Some paints can be produced with primer, and you should check the paint label before use.
For Optimum Durability, Try Using Marine Paints Of Commercial Grade
It is the type of paint used for the painting of boats and swimming pools. This paint can help you to get the highest resistance to fading, cracking and chipping because it is specially made to withstand the harsh conditions of the external environment and weather.
That’s all you need for the type of paint. Let’s come to the next section, and we will give you a simple step to spray paint on the rubber.
Some Tips For You To Have A Perfect Rubber Spray Paint
- You can use “Spray rubber in a can” product, the rubber fillings in liquid form to repair cracks, small holes and leaks. You only need to spray it to cover the leak on your rubber things immediately.
- You should give it a nice shake with the spray paint bottle several times to mix the paint evenly and make the paint smoother when finished spraying. Other instructions from the manufacturer, you need to read carefully before using to use it to its fullest extent and achieve the best result for yourself.
- Some paints are ready for use, while others will need to be mixed according to the manufacturer’s instructions on the product packaging. Some types of rubber or plastic may not be sprayed on, so you don’t need to try to find the right paint, and you can use other ways to decorate them.
- When you need to paint an object with many surfaces like a square box, you should only paint each surface each time carefully before moving to another surface.
- If you find a spray paint or spots, show that you spray the paint too thick. You need to adjust to keep the paint bottle away from objects even further and spray in a circular motion.
- To ensure safety and avoid inhaling toxic gases of spray paint, you need to work in a well-ventilated area and consider wearing a suitable mask when necessary.
Now, you can see that spraying on rubber is not too difficult. It’s easier than you think, right? But wait, there’s more things we want to provide you.
What do you think about painting the old rubber tire to make a stylish swing hanging in your garden? We’ll walk you through the whole process right now.
Our Bonus For You: The Way To Spray Paint On A Rubber Tire
Because we show you how to spray paint on rubber things, you will easily apply it to a rubber tire. We’ll give you more tips on making swings from an old tire, and you can read the 10-step paint spray on the rubber again.
Here’s all you have to do:
- Step 1: You should clean the tire carefully inside and outside. Remember it is an old tire, so make sure to rinse all the grease and dirt thoroughly, then leave it dry entirely. You need to drill one to three holes at the bottom using a big drill if you want to make a swing.
- Step 2: It’s a good time to spray paint on your tire and give it a brand new look. According to our instructions above, you need to check for suitable spray paint, whether or not it is primed, how long it will take to dry and need to apply multiple coats until it completely covers the black colour of the tire.
Tip for you: You should paint in a spacious and well-ventilated place, as well as spread the paper or plastic cover onto the ground to prevent paint from staining it. You can also put the tire on the bricks to avoid sticking paint to the ground and turn the wheel back to paint below when the top layer is completely dry.
- Step 3: You can draw more patterns for making the tires beautiful by using specialised tape to paste the pattern you want to paint, then you use acrylic paint and paint brushes to décor many colours as you like.
- Step 4: You can paint one or two additional coatings of your design to make it durable. You can draw more textures around and add a circle around the tire that mimics the grooves of the tire.
- Step 5: Now you can complete the swing in your garden. You should choose a sturdy branch, durable rope to withstand the weight of players. Then you tie up the wheel and try playing with this colour swing. So you have a pretty swing for your whole family to play together on your holiday.
Are You Ready To Paint On The Rubber To Create Beautiful Products For Home Use?
From the legs of the chair or the table, the blocking buttons of the windows, old car tires, you can paint them easily and quickly with your favourite colours. Paint spray on rubber items is no longer so difficult for you, once you know the proper ways to do it. Remember to keep yourself safe when using spray paint such as working in a spacious place and using a mask when necessary.
With the right paints, you should carefully read the ingredients, instructions for use from the manufacturer to buy suitable paints to utilize it best. Rubber surface has a specific difficulty when painting, you need to remember the principle is to clean the surface to be painted, sand it, buy the right type of paint, paint it with many thin layers, paint some patterns, coat the surface and leave all the paint layers completely dry before using this item.