This article will be introducing Zinsser Mold Killing Primer – one of the best tools to kill the mold. This coating paint is a trusted product that helps lots of people kick out the mold from their houses. Have you ever heard about Zinsser Mold Killing Primer? Can you use it directly over the mold? How to use this coating paint by the best and easiest way?
The following parts are all things you need to know about Zinsser Mold Killing Primer. Let’s find out now!
Firstly, Zinsser Mold Killing Primer is a kind of protective coating paint which can prevent and kill the mold, mildew, fungi, and odor in the house. Secondly, this paint is also registered to EPA – The Environmental Protection Agency, which means it is reliable and safe for use. Lastly, this coating paint can cover and hide the stains of fungi and microbiological.
Where can Zinsser Mold Killing Primer be used? We can apply this paint in a wide range of facilities from a small house to a bigger space such as a factory, school, hospital, etc. Moreover, Zinsser Mold Killing Primer works most efficiently on walls, ceilings, bathrooms, garages, and basements in which we find the mold most.
In common, we apply a coat of Zinsser Mold Killing Primer before painting over the surfaces. Why should we do this? Because there are many benefits to the primer that you may not know.
Zinsser Mold Killing Primer will fill in the small cracks on the surfaces because these areas cannot be painted. Moreover, the primer helps cover the mold parts, which makes the room brighter and better. It also helps prevent mold, mildew, fungi, and odor inside the room.
The primer does not only prevent the mold but also creates a coat for the paint to stick to. In this way, the paint color remains natural and lasts longer with high quality. If your room is “attacked” by a little mold, Zinsser Mold Killing Primer is the right solution as it’s both economical and efficient.
There is a question here: How long does it take for Zinsser Mold Killing Primer to dry? In common, primer’s dry time depends on the type, temperature, and the humidity of your living environment. In the dry climate, the primer will get dry quickly. In the humid environment, it takes a bit long time.
For most types of primers, the dry time is about 30 minutes to 1 hour. However, we recommend you should wait about 3 hours for the primer to dry evenly before we can continue to paint or recoat. This estimation is applied in a living environment with 25 Celsius degrees and 50 percent of humidity. Higher humidity and a warmer atmosphere can result in an extended dry time.
What about Zinsser Mold Killing Primer? This primer can get dry to the touch within half an hour; then you can recoat after an hour, which is a bit quick. If you want to get a high efficiency of protection, create a topcoat within 72 hours after the application. The final result will come after seven days, let’s wait for the primer to be adhesive and get hard.
There is a fact you should know first: The concrete absorbs moisture, and it also does with paint or primer. It may ruin the paint if you don’t know how to apply the primer on.
However, applying Zinsser Mold Killing Primer on concrete is not the impossible thing. It’s just a bit more difficult than using on drywall. Below is what you will need before applying the primer on the concrete.
First, you must clean the surface. There are many things on the surface of the concrete such as dirt, dust, grease, or fungi that we need to remove. Then, you must also remove old paint which was applied a long time before so that we will have a blank surface. Use a wire brush in this step for high efficiency.
Because the concrete is porous, we need to fill all the small cracks so that the concrete cannot absorb moisture. Doing this also prevents the growth of the mold under the paint. Finally, apply Zinsser Mold Killing Primer thoroughly on the surface and notice to fill the cracks and gaps inside. If you want to continue painting, wait at least 8 hours for the primer to get dry enough.
The answer to this question is yes! Zinsser Mold Killing Primer does not only provide an adhesive surface for the paint to stick to but also makes a protective layer for wood furniture. We often use the primer to fill in the small holes and partially hide the cracks and gaps on the surface. Do you think it’s easy to apply Zinsser Mold Killing Primer on wood?
You need to know some tips before you can apply the primer on wood, which is given as follows.
You can use a brush, roll, or spray primer to apply on wood, but as our recommendation, the brush will give the best result. This tool helps spread the primer thoroughly, while the layer is flat, thin, and soft. The spray primer is easy to use; however, it takes a couple of times to get the surface fully covered.
Before applying the primer, you must clean the surface and make sure to remove all dust, grease, and dirt above. Then, use the brush to apply the first layer of the primer and wait about 8 hours for it to get dry to the touch. Continue to apply the second coat evenly to make sure good coverage.
It is a good question. Just because you see many people paint over the mold doesn’t mean this is a good way. Why? Because the mold doesn’t go anywhere. It’s still there to cause a health hazard for you and your family. The mold grows very fast. With a bit of warmth and humidity, mold can spread widely inside the house.
Can the mold survive under the paint? Yes, it can. It can even ruin the paint above, past through the paint, and come back as the beginning. You will not only see the mold appear again but also see it spreading out much more than before.
The paint cannot kill the mold; therefore, painting over the mold means nothing but to cover and hide it. The mold can still cause bad effect on your health if you let it inside your home. So, should we directly paint over the mold or not? No, we shouldn’t.
Instead, let’s kill the mold thoroughly before starting to paint the areas. You can have the professional mold service to treat and handle the “annoying” mold. As they have a specialized tool and method, the mold will be kicked out mostly. After that, use Zinsser Mold Killing Primer to prevent the mold from growing on the surfaces.
Like many other kinds of primers, Zinsser Mold Killing Primer is easy to use. Follow these five steps to apply it over the mold.
The mold cannot be killed by the mold killing primer, that is the truth. What about Zinsser Mold Killing Primer? Can it kill the mold?
No primer can evenly kill the mold, mildew, or fungi. The mold still survives under the coat of the primer and it just cannot spread out widely. It can cause bad health if there is a great amount of mold inside your home. However, we can treat the small amount by the primer.
Using Zinsser Mold Killing Primer is a good choice to get rid of the mold if there is not too much. If things get worse and you see it all around your house, then you have to call for help from the professional treatment.
It is not difficult to prevent the growth of the mold inside your house. Below are tips that you need to know.
As mentioned above, Zinsser Mold Killing Primer is here to help you inhibit the growth of the mold. This primer creates a chemical coat so that the mold cannot spread out and develop on the surface. It can also provide the beauty to your room by hiding and covering most of the stains and mold areas.
Because the mold needs a little warmth, dust, and moisture to grow and develop, keep your room bright, clean, and dry is essential. You will never know when the mold is visible. But when you realize them, you are a bit late. To prevent is better than to cure. Don’t wait until the mold attacks your house then you get to clean your living environment.
When it rains, water can get inside the room through the cracks and holes in the walls or ceiling. It is a good condition for the mold to grow and develop rapidly. What can we do now? Seal the cracks with the cement and Zinsser Mold Killing Primer to provide a layer on the surface so that water cannot go through.
Above are all things you need to know about Zinsser Mold Killing Primer. It is one of the best mold killing primers in the market, which is trusted by lots of users in the world. This primer can help you handle the problem by yourself and provide long-lasting protection for your walls, ceilings, bathrooms, and basements.
Being aware of the facts about Zinsser Mold Killing Primer will be helpful when you have problems with little mold inside your house. However, if there is much mold, you need a specialized treatment to get rid of the mold efficiently and thoroughly.
As mentioned above, the Zinsser Mold Killing Primer doesn’t kill the mold. This primer can stop the growth of the mold and cover the stains made from it. Are you ready to use Zinsser Mold Killing Primer? Comment below what you are thinking and share your question so that we can help you.